The body of network connection error 1453 reads as follows: When we restart the SRX gateway error 1453 goes away but it comes back about 12-15 hrs later.

We downloaded a copy of it from Pulse Secure's site and we use it with a license that comes by default with the purchase of an SRX 300. The Pulse secure VPN client installed on the Win10 machines is v. PuTTy ssh can connect to both gateways w/o a problem even if the problem explained below is active.

We own two SRX300 gateways setup to connect 2 business locations. Our desktops/laptops are running Win (OS Build 17134.590). Don't forget to delete this route when disconnected from VPN.We're newcomers in the Pulse Secure/Juniper Community and technology as well, seeking assistance for a resolution of a problem summarized in the subject of this post. Or if you want access to all the devices on the 192.168.1.* network, then this: route add 192.168.1.0 mask 255.255.255.0 192.168.1.104 metric 2Īnd that should get your laptop to having access to your desktop again. I think it will be something like this: destination netmask gateway interface Metricġ92.168.1.107 255.255.255 On-Link 192.168.1.104 2 What you need to do is manually add a route to your other computer. So that effectively nullifies the first row, which is your original default route. In your case, there are two default routes destination netmask gateway interface MetricĠ.0.0.0 0.0.0.0 192.168.1.1 192.168.1.104 27īut look what the VPN software did - the second route through 10.148.184.192 has lower 'metric' (cost). When you VPN into another network, your routing table gets modified such that the default route (0.0.0.0) goes through your new virtual IP address (10.148.184.192). Before I connecting vpn on laptop, the laptop IP is 192.168.1.104 and the desktop is 192.168.1.107, I can ping the laptop from my desktop. I have 2 machines in LAN, one is desktop, the other is a laptop.

Juno pulse secure client